Specialist In Locating Hard To Find Metals
Header Content Region
Insert text, image or banner ads here, or just delete this text and leave this area blank!
The Strongest Name In Specialty Metals
NITRONIC® 60 - Austenitic Stainless Steel
Nitronic 60 is considerably stronger than the conventional 300 series stainless steels but the same fabrication equipment and techniques are utilized.
Nitronic 60 is a fully austenitic alloy was originally designed for high temperatures around 1800ºF. The oxidation resistance of Nitronic 60 is similar to Type 309 SS, and far superior to Type 304 SS The additions of Si and Mn have given the alloy a matrix to inhibit wear, galling, and fretting even in the annealed condition. Higher strengths are attainable through cold working the material and is still fully austenitic after severe cold-working.
Nitronic 60 is also considered the best galling resistance of all stainless steels with excellent corrosion resistance and high pitting resistance.
Valve Stems, Seats and Trim, Fastening Systems, Screening, chain-drive Systems, Pins, Bushings and Roller Bearings, Pump Components (Wear Rings and Lobes)
MasterSource stocks NITRONIC® 60 inventory as noted below.
ARMCO NITRONIC 60
Cast: UNS J92972
Cast Grade: CF10SMnN
Wrought: UNS S21800
Cr 17, Mn 8, Ni 8.5, Si 4, N 0.13, C 0.10, Fe Bal
ASME SB479 Grade B8S
ASTM A193 Grade B8S
ASTM A 194
Sheet and Plate
Round, square & flat bar, plate, sheet, strip, coil, seamless
tubing & wire.
Round bar from: 1/4" to 10" Dia
Square bar from: 1/4", 1/2" & 2"
Seamless Rolled Rings & Open Die Forgings
Diameter up to 65 inches
Length up to 30 inches
Weight up to 1600#
Compliance: Metals distributed by and thru MasterSource Company Inc. are in compliance with Section 1502 of the Dodd-Frank Act pertaining to conflict minerals.
NITRONIC® is a registered Trade Mark of Armco Inc.