Specialty Metals
Specialist In Locating Hard To Find Metals
Header Content Region
Insert text, image or banner ads here, or just delete this text and leave this area blank!
Plates, Sheets & Coils
Aluminum, Armor Plate, Copper, Brass, Military Plates, Stainless Steel, Steel, Titanium....
Round, Hex, Flat, & Square Bar
Aluminum, Brass, Bronze, Copper, Sintered Bronze, Stainless Steel, Steel, Titanium....
Foil, Ribbon & Strip
Aluminum, Copper, Brass, Stainless Steel, Steel, Titanium....
Wire
Round, Flat. Square, All Shapes of Wire; Aluminum, Brass, Bronze, Copper, Stainless Steel, Steel & Titanium Wire....
The Strongest Name In Specialty Metals
Nuclear
Industrial
ALLOY 60 - Austenitic Stainless Steel
Alloy 60 is considerably stronger than the conventional 300 series stainless steels but the same fabrication equipment and techniques are utilized.
Alloy 60 is a fully austenitic alloy was originally designed for high temperatures around 1800ºF. The oxidation resistance of Alloy 60 is similar to Type 309 SS, and far superior to Type 304 SS The additions of Si and Mn have given the alloy a matrix to inhibit wear, galling, and fretting even in the annealed condition. Higher strengths are attainable through cold working the material and is still fully austenitic after severe cold-working.
Ni 60 is also considered the best galling resistance of all stainless steels with excellent corrosion resistance and high pitting resistance.
Application
Valve Stems, Seats and Trim, Fastening Systems, Screening,
chain-drive Systems, Pins, Bushings and Roller Bearings,
Pump Components (Wear Rings and Lobes)
MasterSource stocks NI 60 inventory as noted below.
| Alloy | Specifications |
| UNS S21800 218SS Alloy 218 ALLOY 60 Cast: UNS J92972 Cast Grade: CF10SMnN N60 Stainless NI 60 Stainless Steel UNS S21800 Cr 17, Mn 8, Ni 8.5, Si 4, N 0.13, C 0.10, Fe Bal |
Bar AMS 5848 ASME SB479 Grade B8S ASTM A193 Grade B8S ASTM A194 ASTM A276 ASTM A479 Forging AMS 5848 ASTM A182 ASTM A193 ASTM A 194 ASTM A276 ASTM A479 Sheet and Plate ASTM A240 Cast ASTM A351 ASTM A743 Custom Sizes Forgings |
INVENTORY FORMS
Round, square & flat bar, plate, sheet, strip, coil, seamless
tubing & wire.
Round bar from: 1/4" to 10" Dia
Square bar from: 1/4", 1/2" & 2"
Seamless Rolled Rings & Open Die Forgings
Diameter up to 65 inches
Length up to 30 inches
Weight up to 1600#
Compliance: Metals distributed by and thru MasterSource Company Inc. are in compliance with Section 1502 of the Dodd-Frank Act pertaining to conflict minerals.
