Specialty Metals
Specialist In Locating Hard To Find Metals
Header Content Region
Insert text, image or banner ads here, or just delete this text and leave this area blank!
The Strongest Name In Specialty Metals
17-4 PH - Precipitation Hardened Stainless Steel
17-4 PH® is a martensitic precipitation-hardening stainless steel that provides an outstanding combination of high strength, good corrosion resistance, good mechanical properties at temperatures up to 600°F (316°C), good toughness in both base metal and welds, and shorttime, low-temperature heat treatments that minimize warpage and scaling. This versatile material is widely used in the aerospace, chemical, petrochemical, food processing, paper and general metalworking industries.
Alloy | Specifications |
17-4 PH 17-4 SS 17-4 Stainless Steel AISI 630 AISI Type 630 AISI Type S17400 PH 17-4 UNS S17400 Alloy UNS S17400 Custom 630 Grade 630 Type 630 17Cr-4Ni 17Cr-4Ni-3Cu X5CrNiCuNb17-4-4 Stainless Steel 17Cr-4Ni VIRGO 17.4 PH Cr-Ni Precipitation Hardening |
AMS 5604 AMS 5643 AMS 7474 ASME SA 705 ASTM A 564 ASTM SA 564 ASTM A 693 ASME SA 693 ASTM A 705 Wire Flat Wire Round Wire Special Wire Shapes Square Wire Custom Shapes Forgings |
INVENTORY FORMS
Rod, Flats, Square,
Hex, Coil, Plate, Sheet, Strip, Foil, Tubes and Wire.
17-4 PH sheet sizes:
Compliance: Metals distributed by and thru MasterSource Company Inc. are in compliance with Section 1502 of the Dodd-Frank Act pertaining to conflict minerals.
PH 17-4 PH® is a registered trademark of Armco, Inc.